IMOS On-Prem - Piracy and ECA Routing

ECA Routing

To set up ECA routing, do any of the following:

• On the Voyage Estimate (Column or Details view) or Voyage Manager, set ECA Routing/Avoidance:
  

• On the Veslink Distances or Voyage Reporting map, select Minimize ECA Routing.

• In Veslink Distances Map Settings, there is a Minimize ECA Routing check box. When selected, routes will be calculated to minimize travel through ECA zones.

ECA Fuel Zones

• ECA-AUSTRALIA

• ECA-BRAZIL

• ECA-CHINA: When using this fuel zone, set YANGTZE RIVER DELTA, and YANGTZE RIVER DELTA 10OCT18 as inactive. ECA-CHINA incorporates all of these zones together so the others are no longer needed. When keeping them all activated this will cause duplicated passing points in the itinerary.

• ECA-KOREA PORTS

• ECA-MALAYSIA

• ECA-SUEZ CANAL

• ECA-TAIWAN

• ECA-YANGTZE INNER RIVER

• HAWAII 200NM

• ICELAND

• NORTH SEA

• PANAMA CANAL

• PUERTO RICO 200NM

• USA 200NM

• USA 24NM

• WORLDWIDE: This zone is used to set the Fuel Types to be consumed in ports that are not located in any of these Fuel Zones but have the Low Sulfur ECA check box selected. This includes any historic Estimates created without Fuel Zone information. It should include only Fuel Types that were being used for low sulfur consumption before configuring Fuel Zones (and no cons rate only); otherwise, the consumption rates and types will change on Estimates/voyages created before Fuel Zones were enabled.

• YANGTZE RIVER DELTA

• YANGTZE RIVER DELTA 1OCT18

• ECA-HAINAN

If Worldwide/Worldwide (Non-ECA) or other ECA zones are missing from the Fuel Zones table, they may have been deleted (by right-clicking on the row) or the distance file is not up to date. These values can be populated into the system by upload the Distances file. The latest Distances file can be found at the Client Center or can be requested through our Veson Support Portal.  

Specific Fuel Zone Consumption within ECA Zones: 

 IMO 2020 functionality allows for flexibility in the Fuel Zone set-up. Regardless of scrubber presence on a vessel, calculations are dependent upon which fuels are consumed in each specific zone (including "Worldwide", and "Worldwide Non-ECA"). This can be configured once in Fuel Zones so that additional changes do not need to be made.