Page Comparison

As of January 1, 2015, new SOx regulations state that vessels traveling through Emission Control Areas are required to use fuel with less than 0.1% sulfur content. To comply with these regulations, in the Integrated Maritime Operations System (IMOS), you can configure bunker consumption rules for LS MGO 0.1% within ECA regions. This is done using Fuel Zones functionality, which allows you to specify the low sulfur Fuel Types to be consumed in each ECA zone and the consumption rates for those Fuel Types.

...

1. Look at the Fuel Types in your current environment to determine if a new Fuel Type needs to be added for LS MGO 0.1%. If so, complete the following:
   1. In the Data Center, under Vessels, click Fuel/Lube Types. Add a row for the LSG Fuel Type, and in the G column, select L (Low Sulfur Grade).
   2. Add this new fuel to the Vessel form Consumption tab for each vessel.
2. If ECA Zone Regulations for LSG are not already in use, add them by enabling Fuel Zones.
   • More information regarding turning on Fuel Zones can be found on the Fuel Zones page.
3. Fuel Zones will now be in effect for all new voyages and Estimates created in IMOS. However, there may be existing voyages or Estimates in which the consumption needs to be recalculated. To determine how many existing voyages or Estimates need to be updated, you can import and run the attached Report Definitions in your system.
   • Estimates with ECA impact
   • Voyages with ECA impact 
4. To recalculate Bunker Consumption and cost and apply the new Fuel Zones configuration on already existing voyages and Estimates:
   • For each Commenced or Scheduled voyage passing through an ECA Zone, on the Voyage Bunkers form, click the Use Fuel Zones button.
   • For each unfixed Estimate passing through an ECA Zone, on the Bunker Planning form, click the Use Fuel Zones button.

...

1. • .