Welcome to the Veson Nautical Knowledge Base. In the Help Center, you can view the same articles and contact support as needed.

VMS - Voyage legs guide

Owned by Antonia Podobenova
Last updated: Jul 08, 2024 by Melanie Whitelock
2 min read

This guide shows you how to add, remove, or edit voyage legs in VMS.

Add a voyage leg

To add a voyage leg, open the voyage, and in the LEGS tab, click Add:

image-20240426-093244.png

 A new window appears. Fill in the relevant details and close.

image-20240426-093305.png

The new leg will be added as shown in the following image:

image-20240426-093447.png

If you want to add a leg in the middle, hover over the port, click on an arrow, as shown in the following image, and select Insert Leg.

image-20240426-093435.png

In the open window, fill in the relevant details.

image-20240426-093511.png

Remove a voyage leg

 Hover over the relevant port, and the arrow appears, as shown in the following image.

image-20240426-093531.png

Select Remove.

image-20240426-093538.png

Edit a voyage leg

Hover over the relevant port, click the arrow, and select Edit.

image-20240426-093610.png

A new window appears where you can edit information:

image-20240426-093627.png

 

Still need help? Visit the Veson Nautical Help Center.

Copyright © 2017-2024 Veson Nautical LLC All Rights Reserved - Privacy Notice | End User Terms of Use