Open this article in a new tab ⭧
Piracy Routing
To set up piracy routing, do any of the following:
- On the Estimate (column or details) or Voyage Manager, set Piracy Routing/Avoidance:
Default: Uses the vessel's default routing preferences specified on the Routes tab in the Vessel form.
Disabled: Uses the most direct route.
Enabled: Reroutes around all piracy zones.
- On the Estimate, Voyage, or Distances map, select Minimize Piracy Routing.
- In Distances Map Settings, there is a Minimize Piracy check box. When selected, routes will be calculated to minimize travel through Piracy Zones.
Piracy Zones
- GUINEA
- HIGH RISK AREA
- JWC INDIAN OCEAN 2013
- JWC INDIAN OCEAN 2015
- PIRACY-DNK-WAR RISK TRADING LIMITS 2017
- PIRACY-JWC INDIAN OCEAN 2019
- PIRACY-JWLA-024-EM-WEST
- PIRACY-JWLA-024-LIBYA
- PIRACY-JWLA-024-VENEZUELA
- SHELL PIRACY ZONE
- SOMALIA
- SOMALIA 250NM
ECA Routing
To set up ECA routing, do any of the following:
- On the Estimate (column or details) or Voyage Manager, set ECA Routing:
Default: Uses the vessel's default routing preferences specified on the Routes tab in the Vessel form.
Disabled: Uses the most direct route.
Enabled: Reroutes around all ECA zones.
- On the Estimate, Voyage, or Distances map, select Minimize ECA Routing.
- In Distances Map Settings, there is a Minimize ECA check box. When selected, routes will be calculated to minimize travel through ECA Zones.
If a port is located within a Fuel Zone, its name appears on the Properties panel.
A port is assigned to the smallest Fuel Zone within which it is located. For example, HUENEME is assigned to USA 25NM zone, but it is also located in US 200NM:
To override the low sulfur status, select the Use High Sulfur Fuel check box. Any future in-port consumption at that port uses high sulfur fuel.
To specify a port as a low sulfur area, select the Low Sulfur ECA check box.
You can also specify an Emission Control Area as a low sulfur area, automatically setting the area and all ports in it to low sulfur. To confirm that you have the latest version of Distances, make sure that ECA Fuel Zone ports are in your Port List, and confirm that the Low Sulfur ECA check box is selected in all of them.
For other ports, the Fuel Zone field contains None.
Low Sulfur Fuel Use: Port Selections & Fuel Grades Consumed
Port Selections | Fuel Grades Consumed in LS Port |
---|---|
| G and H |
| All L grades |
| L grades specified in CFGLSPortConsumptionDefaultGrades |
| L grades specified in CFGLSPortConsumptionDefaultGrades |
| L grades specified in CFGLSPortConsumptionLSFOGrades |
| No L grades |
ECA Fuel Zones
- ECA-AUSTRALIA
- ECA-BRAZIL
ECA BOHAI SEA - BOHAI SEA is a zone that is contained under the China ECA zone for propulsion.
- ECA-CHINA: When using this fuel zone, set YANGTZE RIVER DELTA, and YANGTZE RIVER DELTA 10OCT18 as inactive. ECA-CHINA incorporates these zones together so the others are no longer needed. When keeping them all activated will cause duplicated passing points in the itinerary.
- ECA-KOREA PORTS
- ECA-MALAYSIA
- ECA-MEDITERRANEAN
- ECA-SUEZ CANAL
- ECA-TAIWAN
- ECA-YANGTZE INNER RIVER
- HAWAII 200NM
- ICELAND
- NORTH SEA
- PANAMA CANAL
- PUERTO RICO 200NM
- USA 200NM
- USA 24NM
- WORLDWIDE: This zone is used to set the Fuel Types to be consumed in ports that are not located in any of these Fuel Zones but have the Low Sulfur ECA check box selected. This includes any historic Estimates created without Fuel Zone information. It should include only Fuel Types that were being used for low sulfur consumption before configuring Fuel Zones (and no cons rate only); otherwise, the consumption rates and types will change on Estimates/voyages created before Fuel Zones were enabled.
- YANGTZE RIVER DELTA
- YANGTZE RIVER DELTA 1OCT18