Welcome to the Veson Nautical Knowledge Base. In the Help Center, you can view the same articles and contact support as needed.

IMOS - Cargo Groups

To create a Cargo Group:

  1. On the /wiki/spaces/imosv710/pages/64335970 toolbar, click Cargo Groups.
  2. On the Cargo Groups form:
    1. Add a new row.
    2. Enter a Code, Description, Class, and CP Unit.
      Note: Additional columns can be enabled with configuration flags.
    3. Close the form.
  3. Create a Cargo Name with a Short Name matching the Cargo Group Description. Assign it to the Cargo Group.

Creating Super Groups and Subgroups

You can create a top-level layer in the Cargo hierarchy, a Super Group, that encompasses one or more existing Cargo Groups for use with multigrade configurations. This facilitates the selection of grades from any group within a Super Group when the Super Group is used at the CP level in the EstimateVoyage Fixture, or Voyage Manager. Follow these steps:

  1. On the Cargo Groups form, add a new row to the grid and name the Super Group (in the Group column).
  2. Right-click the row and then click Subgroups.
  3. On the Cargo Subgroups form, add rows and select the existing groups to be part of the Super Group. A Cargo Group can belong to multiple Super Groups.
  4. On the EstimateVoyage Fixture, or Voyage Manager, if you select a Super Group at the CP-level Cargo Group, you can then select any grade belonging to any of the groups that are part of the Super Group. Stowage factors will continue to default basis the grade selection.

Example: Creating a Super Group 

  1. To create a Cargo Super group like above, navigate to Cargo Names > Cargo Groups.

  2. Add New Row to create a Cargo Super Group.

  3. Right-click the row and then click Subgroups.

  4. Add rows and select the existing Cargo Groups to be part of the Super Group. e.g. Chemical, and Edible Oils and FATS.
  5. Once created, exit to save.

  6. In the IMOS Cargo Name page, create a cargo with the Short Name to be same as Cargo Group. Click Save.


  7. In Estimates, Voyage Fixture or Voyage Manager, when configuring the cargo on CP Term Details, select the Cargo Group name that was added as a Super Group. User can now select the all cargoes in the Cargo Subgroups from the “Grades” column.
    e.g. Canola Oil is under Edible Oils and Fats Cargo Group and Caradol is under Chemical Cargo Group.


  8. If a Cargo ID is usually created via cargo import, the <cargo> should now be replaced with the Super Group <cargo>SUPER GROUP</cargo>. The <grades> tag can remain the same as the system is now be able to read the different grades from multi-cargo.


 Related Configuration Flags
Name/FlagDescription
Enable Alt Lift Unit
CFGEnableAltLiftUnit

Enables Unit of Measure Conversion for MT, BBL, and M3.

  • Group defaults can be overridden at an individual grade level on the Cargo Name form or on the Estimate/Voyage Fixture/Voyage.
  • With this option, several additional columns appear on forms:
    • Cargo Groups: CP Unit, Lift Unit, Alt Lift Unit, and Convert
    • CP Terms Details: Alt Qty and Alt Unit on the Itinerary tab of the grid
    • EstimateVoyage Fixture, and Voyage Itinerary grid: Alt Qty and Alt Unit on the Draft/Restrictions tab

Within Data Center, if the Cargo Group has the Convert checkbox selected; and within the Cargo/Estimate/Fixture/Voyage, there is a value and a unit of measure for L/D Qty, a unit of measure for Alt Unit, and nonzero values for API/SG, then the Alt Qty value is automatically calculated. An L/D Qty can also be calculated from a manually entered Alt Qty: To trigger recalculation, enter the Alt Qty and then clear the L/D Qty value. This procedure can also be used to calculate the quantities based on a manually entered API/SG.

Note: Within Cargo Groups, the Alt Lift Unit field only works when CFGEnableMultiGrade is enabled too. 

Still need help? Visit the Veson Nautical Help Center.

Copyright © 2017-2024 Veson Nautical LLC All Rights Reserved - Privacy Notice | End User Terms of Use