You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
On this form, you can enter the name and information for each type of cargo.
- To create a Cargo Name, do one of the following:
- On the Cargo Name form, enter a Cargo Short Name (32 characters or fewer). Then press Enter or Tab. A message asks you to confirm that you are adding a new cargo. Click OK.
- Select or enter a IMOS - Cargo Group. Depending on the group, the form includes fields for either liquid or dry cargo.
- Add any User-Defined Fields in the grid at the bottom.
Multigrade Cargoes
Configuration flag CFGEnableMultiGrade enables Multigrade Cargoes. For this configuration:
- Each Cargo Name must be tied to a IMOS - Cargo Group.
- One Cargo Name must be created with the same name as the Cargo Group.
Importing Multigrade Cargoes into IMOS with XML
- On Cargoes imported via the XML interface, IMOS will read in the <grade> field and import the Cargo properly, provided:
- Multigrade is enabled <imosProperty name="CFGEnableMultiGrade" value="Y" />
- IMOS will import the Cargo without this flag and will display the Grades, but will not carry these Grades through to the Voyage Fixture.
- All Cargoes are in the Cargo Group form and all Grades are in the Cargo Name form in the Data Center.
- When going from the Cargo to the Voyage Fixture, the Cargo field will be populated by the <cargo group> for the item in the <cargo> field in the imported XML.
- The Charterer is in the Address Book in the Data Center.
- The Ports are in the Port form in the Data Center.
- Every <grade> has at least one load and discharge port. (A grade can have multiple load or discharge ports.)
- IMOS does not check:
- That quantities sum up properly for different grades.
- That the Supplier/Receiver is in the Address Book.
- If there is any relationship between the Cargoes/Grades. (That is, the <Cargo> field does not need to be set up as a normal IMOS multicargo. This could allow some items to be created through the interface that could not be created through a similar setup in IMOS.)
- IMOS does not allow:
- Blending: IMOS will fail a Cargo that loads grade A and discharges grade B. IMOS expects matched sets.
- Unnamed/unmapped ports.
Cargo Name List
All Cargo Names appear on the Cargo Name List. In the Data Center, next to Cargo Name, click List.
The Cargo Name List is a standard IMOS list, so you can sort it, filter it, do a IMOS - Quick Search, and create custom Views for it.
Related Config Flags
CFGEnableOPA | |
CFGEnableMultiGrade | |
CFGEnableMTBETracking | |
CFGEnableChemCargoNameFields | |