Page Comparison

Insert excerptVeson IMOS Platform DocumentationVeson IMOS Platform DocumentationnopaneltrueHome > Claims > New Laytime Calculation Setup

...

The Laytime Calculation is created from the New Laytime Calculation Setup form. For chemical tankers, see Booking-Based Laytime Calculation Setup.

1. To set up a Laytime Calculation, use one of these methods:
   • In the Voyage Manager, click _{Image Removed} and click Laytime ▼ and then click Laytime Calculation.
   • On the Operations menu , under Freight/Demurrage, click Laytime Calculator. Enter the Vessel and Voyage.
     Charterer or Owner:
     
     Receiver or Supplier:
     
2. On the New Laytime Calculation Setup form, check that the following values are entered, or enter them. Any existing demurrage calculations for this voyage appear in the table at the bottom.
   • Vessel: Select from a list of all vessels: active vessels, deactivated vessels, and if a vessel name has changed, its old name appears here as well.
   • Voyage: When an FOBV voyage is selected, the cargo handlings of all FOB Cargoes appear.

     Anchor
     APAR APAR

   • AP/AR (Receiver or Supplier): Select whether to consider the demurrage or despatch as AP or AR.
   • Counterparty Type: The selected type appears on the left side of the form. If there is only one counterparty of that type, it is selected. All cargo handling lines for a Charterer, discharges for a Receiver, or loads for a Supplier are selected by default.
   • Method: Deduction or Time Counting
   • Reversible Selected Ports: To create a Reversible Laytime Calculation, select this check box.
3. In the Counterparty and Port/Cargo tables, all options are selected. To exclude an option from the calculation, clear its check box.
   Note: In the Port/Cargo table, the configurable Barges column displays only those barges associated with the individual cargo (as established in the BL Info tab of the voyage itinerary). Additionally, in the Laytime Calculation, for any activity line to which more than one barge applies, the complete list of barges is listed in the Remarks column.
4. Select any additional options and click OK. The Laytime Calculation opens.

...

...