Versions Compared

Old Version 8

changes.mady.by.user Former user

Saved on

compared with

New Version 9

changes.mady.by.user Jessica Sullivan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Insert excerpt
IMOS Documentation
IMOS Documentation
nopaneltrue

...

  • Consumption in Port (L/D/Idle)
  • Misc. Consumption (Heat/IGS/Etc.)
  • (cons rate only): In some ECA Zones, one Fuel Type must be consumed at its own consumption rate plus the consumption rate of another Fuel Type. To consume the first Fuel Type at the rate of both added together, select one Fuel Type plus one (cons rate only) Fuel Type. All Fuel Types can be used as (cons rate only).

...

  • For Estimates and voyages that were created before Fuel Zones were enabled, click the Use Fuel Zones button on the Voyage Bunkers or Bunker Planning form to update them. After that single click, the button does not appear again, because it does not trigger again every time Fuel Zones and consumption are changed.
    • If the voyage is linked to a TC, confirm that the contract is burning the correct fuel according to the fuel zone update. If the fuel matrix on the TC does not include the fuel type, it will not be picked up on the estimate or voyage.
  • After Fuel Zones are enabled, any change on an Estimate or a voyage that triggers a recalculation of the voyage or Estimate causes a recalculation of the fuel consumption/cost based on the current Fuel Zones setup.
  • Changes to Fuel Zones do not automatically refresh existing Estimates and voyages, but changes will be reflected on all Estimates and voyages created after enabling Fuel Zones.

...

Fuel zone updates are regulated by deactivating older versions to avoid duplicate passing points in a voyage itinerary.

Legacy Fuel Zone Set

If you began using Fuel Zones before the 2015 ECA changes, the modifications made to your Fuel Zone configuration may have changed estimated bunker consumption in historic records. To create a Legacy Fuel Zone Set with pre-2015 Fuel/Lube Types and use it on historic records:

...

Expand
titleRelated Configuration Flags


Name/FlagDescription
Enable Scrubber Type
CFGEnableScrubberType		When enabled, a scrubber drop-down menu appears on the Port, Voyage Bunkers, Bunker Planning, and Vessel forms accessed through a Voyage Estimate. On the Port and Vessel forms, the drop-down menu reflects scrubber values allowed at the port and equipped in the vessel. On the Voyage Estimate and Voyage, it reflects the scrubber type used for bunker calculations. On the Vessel form, the “Use Scrubbers” check box is replaced with the new “Scrubber Type” drop-down menu. The Fuel Zones form has two tabs to support “Scrubber” and “Non-Scrubber” configurations. These new options facilitate bunker calculations to use the IMO 2020 regulations.


...