Welcome to the Veson Nautical Knowledge Base. In the Help Center, you can view the same articles and contact support as needed.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

 This is a Key Topic, with high value for all users.


Activity Reports track the movement of a vessel throughout a voyage.

In the Voyage Manager Itinerary, right-click the port line and click Activity Reports.

Activity Reports track the following activities when you are in port or traveling between ports. Reports are generally entered in this sequence:

C = Commencing: This report is created when you commence the voyage.

At sea:

N = Noon: When you are sailing between ports, you can enter Noon Reports. After you enter one Noon report, the time defaults to 24 hours after the last one. This report can be entered multiple times per sea leg.
E = End of Leg: This report is created when you enter the arrival date and time for the next port in Port Activities.

In port:

A = Arrival: This report is created when you enter the arrival date and time in Port Activities.
S = Special: While the vessel is in port, you can enter a special Noon Report. This report can be entered multiple times per port leg.
D = Departure: This report is created when you enter the departure date and time in Port Activities.

T = Terminating: This report is created when you either arrive at a Terminating port or sail from the last port in a voyage.

  • To enter more detailed information on the IMOS - Extra Information for Report form, right-click the report line and click Extra Information (Bunker/Technical/Weather/Remarks).
  • For an LNG Carrier (Type code L), Tanker (Type code T), or Gas Carrier (Type code G), to enter IMOS - Tank Conditions, right-click the report line and click Tank Conditions.

Bad Weather

Fuel consumption from Activity Reports where the Beaufort Scale (B) reading is above a certain level (set on the Vessel form Consumption tab or the Time Charter Manager Performance tab) is excluded from performance calculations. Default values are taken from these forms, according to the voyage type:

 

 Related Config Flags
CFGNeverUpdEtaEtd

  • No labels