Error rendering macro 'excerpt-include' : No link could be created for 'help:IMOS Documentation'.

Note: Configuration flag CFGDisplayBunkerAlerts must be enabled, and the Bunker Alert List Module Right must be selected in Security.

Bunker Alerts notify you of new or changed Bunker Requirements. The list only appears if there are alerts that have not yet been accepted by a Bunker Manager.

Generating Bunker Alerts

To generate a Bunker Alert to appear on the list, a user must have either the Edit Operator's Fields on Bunker Requirement or Edit Bunker Manager's Fields on Bunker Requirement Module Right selected (not both), under Actions in Operations.

An alert appears whenever a user creates, modifies, or cancels a Bunker Requirement.

The alert does not appear on the list if:

The modification happens after clicking the Accept Alert button in the Bunker Requirement.
All the Bunker Purchases linked to the Requirement are in status Invoiced.

The Bunker Alert List can be set to refresh and display automatically at a specified time interval. In Operations List Settings, in the Bunker Alerts List section, select the check box and enter a Refresh Interval in minutes.

Managing Bunker Alerts

To manage alerts in the Bunker Alert List:

In the Operations module center , under Bunkers, click Bunker Alert List.
To remove an alert from the list, open the Bunker Requirement and do one of the following:
- To accept a new Bunker Alert, click . You are recorded as the Bunker Manager for the Bunker Requirement; you can assign another user as the Bunker Manager.
- To work with an alert that you have already accepted, edit the Bunker Requirement and save it.

Related Configuration Flags

CFGDisplayBunkerAlerts

Enables the Bunker Alert List. The list shows all recently created bunker requests not assigned to a Bunker Manager.

Also adds these settings to the Operations Lists Settings form:

Auto Display Alerts List: Select to have Alerts always appear.
Refresh Alerts (mins): Number of minutes between refreshes.