View IMOS Documentation in the Help Center.

In Estimate Vessel Matrix, you can enter different vessels to compare their costs, speed, and open ports. Vessel details are set up on the Vessel form in the Data Center; you can adjust them for this Voyage Estimate.

On a Voyage Estimate Column View menu, click Vessel Matrix.

In the grid, add vessels and adjust scenarios for them. To create a copy of the active Voyage Estimate for each vessel in the grid, click Create. Vessel properties specified for each grid line are set on the Voyage Estimate copy.

To create a report that compares matrix Estimates, on the Voyage Estimate menu, hover over Reports and then click Voyage Estimate Column Report.
To compare the open Estimates in a list view, select the Active List tab on the bottom of the Voyage Estimate.

Related Configuration Flags

CFGVoyestRetainBunkerPrices

Changing vessels on a Voyage Estimate will map the bunker prices for the first vessel onto the new vessel where appropriate; fuels unavailable on the new vessel will not be available and hence not have prices, and fuels available on the new vessel that are absent from the first vessel will pull their prices from the last voyage prices (unless explicitly disabled with use of config flag CFGUseVesselLastFuelCost ), or the last Voyage Estimate (if CFGUseVesselLastFuelCost is disabled and CFGUseEstimateLastFuelCost is enabled). On the Estimate Vessel Matrix form, the Preserve Bunker Prices check box is selected by default, but you can change it.

CFGDefaultPortExpSearchLimit

To automatically start with default search criteria and a default Limit.

Browser not supported