Welcome to the Veson Nautical Knowledge Base. In the Help Center, you can view the same articles and contact support as needed.

IMOS - Fuel Zones

Home > Data Center > Fuel Zones


You must have the Fuel Zones Module Right selected under Ports and Areas in the Data Center.

The Fuel Zones form is used to specify estimated/projected low sulfur consumption for different ECA Fuel Zones. Consumption is specified in sets and can accommodate different ECA regulations, different Vessel Types, and other factors. You can create multiple Fuel Zone Sets, including a Global Default Set, and apply them to specific vesselsVessel TypesEstimates, and voyages.

On the Data Center menu , under Ports and Areas, click Fuel Zones.

When the configuration flag CFGEnableScrubberType is enabled, high-sulfur fuels cannot be added to the Non-Scrubber tab of the Fuel Zones form. If the drop-down menu only allows the (cons rate only) to be entered, the fuel is labeled as a high-sulfur fuel on the Fuel/Lube Types form.

Creating a Fuel Zone Set

See IMOS - Creating a Fuel Zone Set.

Scrubber settings

For the following ECA zones, scrubber settings as set on the representative port record will now be applied for At Sea consumption:

  • ECA - GULF OF ST. LAWRENCE

  • ECA - BALTIC SEA

  • ECA - PUGET SOUND

  • ECA - COLUMBIA RIVER

  • ECA - MISSISSIPPI RIVER ECA - AMAZON RIVER

  • ECA - ARGENTINA-RIVER PLATE

The default scrubber allowance setting for the listed regions is for Closed-loop scrubbers.

Related Articles

 

Name/Flag

Description

Name/Flag

Description

Enable Scrubber Type
CFGEnableScrubberType

When enabled, a scrubber drop-down menu appears on the Port, Voyage Bunkers, Bunker Planning, and Vessel forms accessed through an Estimate. On the Port and Vessel forms, the drop-down menu reflects scrubber values allowed at the port and equipped in the vessel. On the Voyage Estimate and Voyage, it reflects the scrubber type used for bunker calculations. On the Vessel form, the “Use Scrubbers” check box is replaced with the new “Scrubber Type” drop-down menu. The Fuel Zones form has two tabs to support “Scrubber” and “Non-Scrubber” configurations. These new options facilitate bunker calculations to use the IMO 2020 regulations.

 

Still need help? Visit the Veson Nautical Help Center.

Copyright © 2017-2024 Veson Nautical LLC All Rights Reserved - Privacy Notice | End User Terms of Use