Error rendering macro 'excerpt-include' : No link could be created for 'IMOS Documentation'.
The Vessel Consumption tab includes the In Port Consumption Table, Speed Consumption Table, and Variables and Safety Margins.
In Port Consumption Table
- When adding a new Low Sulfur fuel type to a Vessel that has an existing High Sulfur type defined, Port/Sea Consumption rates default to being the same as the High Sulfur consumption rates, if the new Low Sulfur fuel type is in the same Group as the High Sulfur fuel type on the Fuel/Lube Types form.
- When a Vessel Type is selected, and no fuel types are defined yet, the system defaults the Fuel Types, Units, and Grade according to the Vessel Type. If the vessel has not yet been used, changing the Vessel Type gives you the option to replace the existing fuel types with the default fuel types defined for the Vessel Type.
- When the fuel type is H, and an L fuel type exists in the vessel and is in the same Group on the Fuel/Lube Types form, you can copy consumption figures from the HS/LS corresponding fuel type. Right-click the Fuel Type and then click Copy consumption.
Speed Consumption Table
- Figures are separated into Ballast and Laden.
- When the Vessel Type has Restrict Speeds enabled, the speeds available are only those corresponding to the specific Ballast/Laden mode.
For LNG Vessels
Reliq, GCU/Steam, and Meter Adj consumption table columns replace Heat, Heat+, and Heat++.
- You can include Bunker Curve Parameters in the calculation of fuel consumption.