Home > Data Center > Port Functions
...
Idle/Off Cons (for new or unused Port Functions that are not L, D, or M only): Select to calculate In Port Consumption based on Idle/Off Rate (from Vessel Details) and Total Voyage Port Days.
Port Function Codes
...
Code | Port Function | Description |
---|---|---|
C | Commencing | First port function for all voyages, designating the start sea passage time. |
D | Discharging | Requires that a Cargo Handling line exists, as well as B/L Information. |
F | Fueling | Even though received bunkers can be tracked on other functions (such as L or D), using this function is beneficial to designate that you are making a call for bunkers only. It also allows you to build in waiting/fueling time. |
I | Canal Transit | Used for transit through a canal or cape, cape, or transit due to proximity (i.e. the route has to go through the point); you cannot track cargo handled. When this Port Function is selected on an Estimate, a Tolls line item appears in the P&L Estimate column, and all estimated port expenses will be recorded under this item only. |
L | Loading | Requires that a Cargo Handling line exists, as well as B/L Information. |
O | Other | Used as a miscellaneous Port Function and allows you to track time and fuel used at a given location; commonly used for At Sea delays. |
P | Passing | Used to define a route that passes through a specific location; you cannot track port activities or bunkers received. |
R | Repair | Similar to O, but specifies that repairs are in progress for the ship. |
T | Terminating | Optional function that is commonly used to designate a repositioning port. |
W | Waiting | Similar to O, but specifies that the ship is being ordered to wait outside of the port. Incorporates into waiting and unused time for reports. |
Y | Delivery | Note: Time Charter (TC) only. Specifies the exact time when a time chartered ship is delivered. Necessary for TC Out voyages, as this will sync time and fuel between the Voyage Manager and TC forms. |
Z | Redelivery | Note: TC only. Function Z = Redelivery should be used in the itinerary when vessel is being redelivered to owner at port different than the discharging port. T = terminating port function is not required. Specifies the exact time when a time chartered ship is redelivered. Necessary for TC Out voyages, as this will sync time and fuel between the Voyage Manager and Time Charter forms. |
...
Right-click the Port Function for which you want to set up Port Activities and then click Activities List.
The Port Activities for FUNCTION form displays the default activities for the Port Function.
For a Voyage Template only, select the Voyage Template and click to save the form before proceeding. If you do not save, you will be editing the default Function, rather than your Template.
To add or remove a Port Activities, right-click a line item and then click Insert or Delete. A Sequence is assigned to each Port Activity.
Continue to select and adjust Port Activities for each function.
...