Note: If you have purchased the separate Bunker Management module, see Bunker Management, rather than this section.
...
- Multiple types, or grades, of fuel can be set up on the Fuel/Lube Types Term List in the Data Center. For each vessel, you can track up to five fuel types.
- The Bunker Calculation Method is the method of valuing the fuel onboard; it determines how the cost of fuel is allocated to voyages.
To work with bunkers for the voyage, on the Voyage Manager, click 
and then click Voyage Bunkers.
...
Received quantities appear on the Summary tab after they are entered in Port Activities.
To bind a Bunker Invoice to the voyage, in the Bunker Liftings grid, the S check box must be selected.
Fuel Zones
For voyages that are not already using Fuel Zones to calculate bunker consumption and have unsailed ports, a Use Fuel Zones button appears in the bottom right corner. To recalculate estimated bunker consumption and cost based on information entered in Fuel Zones in the Data Center, click 
.
If you have configured a Fuel Zone Set, you can select it, rather than the Default set, at the bottom of this form.
Use Scrubbers
Insert excerpt help:IMOS - Bunker Planning and Estimated Consumption help:IMOS - Bunker Planning and Estimated Consumption nopanel true
...
This form has a detail tab for each bunker grade. On each individual bunker grade tab, you can enter the Operator Quantity. The best known price is defaulted, but you can change it to maintain the P&L bunker expenses. It is the assigned price for this lifting until an invoice is issued for this lifting or a Bunker Purchase is recorded for the port.
Req Qty is only used for a stand-alone Bunker Requirement, and it cannot be edited because a Bunker Requirement can be linked at a later time.
...
The Detail tab for LNG has additional Boil-Off Price, Forced Boil-Off Price, and NBOG Speed Ballast and Laden fields at the bottom:
Surveys Tab
To enter Survey Costs, click 
.
On the Survey Costs form, you can enter information about a survey and allocate parts of the paid amount to rebill the linked TCO/TCI counterparties.
Survey costs appear on the Surveys tab.
| Anchor | ||||
|---|---|---|---|---|
|
...
On the Swaps tab, all the linked trades appear. To access a Bunker Swap, right-click its line and click View Bunker Swap.
Bunker Requirements
To enter a Bunker Requirement, see the Typical Operator-Only Workflow or follow the steps for an Operator and a Bunker Manager.
Barging
With the Barging module, you can also do the following:
- For Tow voyages, click
to access the Bunker Interpolator to initiate the calculation.
- View bunker consumption during Stop delays in the voyage, calculated by the Bunker Interpolator. It appears in the Stop column on the Summary and Detail tabs.
- Click
| Expand | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|