...
Dates can be selected from a calendar and must be entered in the date format specified on the Veslink - Veslink - System Configuration (2) (2) page page. The GMT offset appears next to the Time field; times must be entered in HH:MM format, like 08:10.
On the Arrival Notice or Departure Notice, other logic is associated with the Arrival and Departure fields. For example, on the Departure Notice, the Departure Date/Time updates the Departure Date/Time for the port call and changes the vessel's state from In Port to On Sea Passage.
On a form with a frequency of Daily (which generally means the Noon Report), Veslink issues a warning message if:
...
These controls and field display Fuel Types and consumption Types and consumption categories specified as applicable to the particular Vessel Type (for Veslink only) or IMOS /wiki/spaces/imosv710/pages/64335995Vessel (for Veslink with IMOSConnect).
Bunkers ROB Control
The Bunkers ROB control is a grid with information for each Fuel Type applicable to the particular vessel. For each Fuel Type, the control displays the Last ROB amount and the Unit of measure. The ROB control can capture ROBs by sulfur content within a particular Fuel Type. It can also capture auxiliary-engine fuel consumption separately from main-engine fuel consumption.
...
The Bunker Consumptions control captures total volume as well as the Time (hrs) used within each consumption category, which can assist with performance reporting. For example, in the IMOS Report Designer, you can create a /wiki/spaces/imosv710/pages/64336298Bunker Consumption Breakdown report that shows daily bunker consumption broken down by category and Fuel Type.
...
When Fill % is over 100.00, a warning appears to the vessel-side user. You can also configure a warning to display if capacity is over a set Fill Capacity Warning %.
...