Versions Compared

Old Version 5

changes.mady.by.user Former user

Saved on

compared with

New Version 6

changes.mady.by.user Eleni Koulianou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Insert excerpt
IMOS Documentation
IMOS Documentation
nopaneltrue

...

Expand
titleRelated Configuration Flags


Name/FlagDescription
Disable Insufficient Bunker Warnings by Default
CFGDisableInsufficientBunkerWarningsByDefault

When set to Y, when a new voyage is created, the Turn Off Insufficient Bunker Warnings check box is selected by default, but it can be cleared.

Enable Operations Estimate Sea Cleaning
CFGEnableOpsEstSeaCleaning

Enable estimated sea cleaning consumption to be entered on the Bunkers form.

Enable Scrubber Type
CFGEnableScrubberType		When enabled, a scrubber drop-down menu appears on the Port, Voyage Bunkers, Bunker Planning, and Vessel forms accessed through a Voyage Estimate. On the Port and Vessel forms, the drop-down menu reflects scrubber values allowed at the port and equipped in the vessel. On the Voyage Estimate and Voyage, it reflects the scrubber type used for bunker calculations. On the Vessel form, the “Use Scrubbers” check box is replaced with the new “Scrubber Type” drop-down menu. The Fuel Zones form has two tabs to support “Scrubber” and “Non-Scrubber” configurations. These new options facilitate bunker calculations to use the IMO 2020 regulations.

Exclude TC Consumption from Bunker Calcs

CFGExcludeTcConsFromBunkerCalcs

When enabled, the operations bunker calculations will not use the consumption rates specified in a Time Charter; only the consumption rates specified in the vessel master data in the data center will be used.