Page Comparison

Voyage Estimate Show Cranes in Itinerary Grid
CFGVoyestShowCranesInItinGrid

When enabled, the Cargo tab in an Estimate/Voyage Fixture/Voyage Manager will have a new column C, to indicate the use of Cranes in the specific port. This column will only be visible for bulk vessels, and its value can be editable from the Cargo tab in the Itinerary, the CP Terms Details form, or the Itinerary Details form of that port.

Enable Igs by Default
CFGEnableIgsByDefault

When enabled, when creating/importing a cargo in an Estimate/Voyage Fixture/Voyage, the IGS consumption mode is automatically set to Auto Disch.

Default Overage Xfrt Pct
CFGDefaultOverageXfrtPct

After a value is specified in this flag, an Extra Freight Term for Overage Percent (OP) is automatically added to any Cargo that does not have one, having the specified percentage value.

Default Rev All for Tankers
CFGDefaultRevAllForTankers

For cargoes created within the Estimate, Voyage Fixture, and Voyage Manager if the selected vessel is a tanker (or if no vessel is selected, and the default Vessel Type is tanker), the Reversible All Ports check box is automatically selected on the CP Terms Details form when this flag is enabled.

Estimate Cargo Default Broker
CFGEstimateCargoDefaultBroker

On Estimates, sets a default broker for cargoes, basis broker specified.

Estimate Cargo Default Commission
CFGEstimateCargoDefaultCommission

On Estimates, sets a default brokerage commission amount.

Manual Max Lift Cp Quantity
CFGManualMaxLiftCpQty

When enabled, when using Auto Calculate by Max Lift in an Estimate, the CP Qty for a cargo will never be automatically set by the maximum lift calculation; only the L/D quantities will change. Users can manually change the CP Qty, if desired.

Show Liner Terms
CFGShowLinerTerms

Adds liner terms fields (OExp$/t and LinerExp) to the Voyage Fixture and Estimate. These fields are also synced with the corresponding OExp$/t and LinerExp fields on the Cargo form.

Show Remittance in Cargo
CFGShowRemittanceInCargo

Adds Remittance Bank, Invoice %, Payment Terms, and Balance % fields to the CP Terms Details, Cargo COA, Cargo, VC In COA, and VC In forms. Also adds a Remittance Bank field to Time Charter Other Information. Remittance information flows between these places; for example, fixing an Estimate will transfer the remittance information.

• On a Cargo COA, VC In, or Time Charter Out, changing the Company clears the remittance bank information, as this may change with a change to the Company.

• On a VC In COA or Time Charter In, changing the Owner clears the remittance bank information, as this may change with a change to the Owner.

• A default value for the Remittance Bank for each currency can be selected in the Address Bank Links tab for Cargo COA, Cargo, and Time Charter Out (Other Information) contracts, but it can be changed later.

Default Discharge Demurrage Des Percent
CFGDefaultDischargeDemDesPercent

When enabled, you can specify the default percentage of the loading demurrage/despatch rates the discharge demurrage/despatch rates default to.

Voyage Estimate Use Min Cp Quantity for Charterer Opt
CFGVoyestUseMinCpQtyForChartererOpt

Y = If using Auto Calculate by Max Lift Qty in an Estimate, if the option type for a cargo is a charterer's option, its minimum quantity will be used as a restriction for lift quantity.

N = The CP Qty for the cargo will instead be used for the lift restriction.

Default Cp Date on Cargo
CFGDefaultCpDateOnCargo

When enabled, the CP Date of any Cargo back-created from an Estimate will default to the current date.

Use Fixcar Exch Rate
CFGUseFixcarExchRate

Forces Freight Commission Invoices to use the Exchange Rate on the CP Terms Details form. (For Freight Invoices, the Exchange Rate is always pulled from CP Terms Details regardless of how this flag is set.)

Cargo Bunker Ramp Factor Load
CFGCargoBunkerRampFactorLoad

The value set in this flag is used as the factor applied to the Heating/Cooling consumption at the Cargo's first Load port.

Enable Itinerary Laycan Fields
CFGEnableItinLaycanFields

Adds Laycan From and Laycan To columns to this form.

• When CFGChartererView is enabled, these columns will be named Window From and Window To.

• When CFGVoyapiValidateCargoLaycanForPort is enabled, the Laycan dates will be validated against the ETA/ETD of the voyage. If CFGVoyapiValidateCargoLaycanForPort is not enabled, validation will be against the Laycan dates in the header of the Cargo form.

Enable Lift Quantity Descriptions
CFGEnableLiftQtyDescriptions

Enables Quantity Descriptions, which can be used to indicate the status or intent of cargo lift quantities. You can select a Quantity Description in the Description column on CP Terms Details and Cargo itineraries.

Enable Broker Rules
CFGEnableBrokerRules

When enabled, Cargo Broker Rules and Time Charter Broker Rules can be defined to add default brokers to contracts.

Also adds Add Default Brokers to the TCO Estimate toolbar to default internal brokers by applicable rules.

Enable Commission Sharing
CFGEnableCommissionSharing

When enabled, you can share commissions between internal broker companies. For more information, see Sharing Commissions with Internal Brokers.

Also adds an Internal Counterparty column to the TCO Estimate Broker table.

Enable CP Terms Coordinator
CFGEnableCPTermsCoordinator

When enabled, a Coordinator field is available on the Cargo and VC In CP Terms form. This field is available for an estimate cargo.

Enable Standards
CFGEnableStandards

Hides the Port Expense field on some forms, enables standards for expenses, and adds a Port Expenses Details form and a Port Expenses Details button on the Port Expenses Summary to open it. When detail-level port expenses are being used, the PortExp column in the Voyage Itinerary behaves the same as the PortExp column in the Estimate itinerary:

• For a port with no detail-level port expenses, you can edit its PortExp amount in the Voyage Itinerary Cargo Tab. The voyage P&L shows this amount as estimated expenses for that port.

• For a port with a single detail-level expense, that amount appears and can be edited in the voyage itinerary PortExp field. An estimated expense entered before creating the detail-level expense is no longer displayed in the voyage P&L.

• For a port with multiple detail-level expenses, the itinerary PortExp field shows the sum of the detail-level expenses for that port and cannot be edited.

• When CFGVoyageExpenseAllocation is set to Y, a Voyage Expense Allocation section will be added to the Voyage Estimate Profit & Loss Report, and optionally to the Voyage Profit & Loss Report.

An ECA Factor field also appears on COA, Cargo/VC In, and CP Terms Details forms. When ECAFactor is used in an IMOS ECA Recovery Charge Results/Fee expression and an ECA Factor value is entered on a contract, an ECA Recovery Charge Extra Freight Term is generated on that contract.

• When a COA is created from an Estimate, ECA Factor is copied from CP Terms to the COA.

• When a COA Lifting is created, ECA Factor is copied from the COA to the Cargo.

• When a cargo is scheduled, ECA Factor is copied from the cargo to the back-created Estimate.

Enable Itin NOR Hours
CFGEnableItinNORHours

Adds NOR Hrs column to CP Terms Details itinerary.

Dem NOR Offset
CFGDemNOROffset

If you set the CFGDemNOROffset setting to 0, the NOR offset will be taken as zero instead of 6 when the checkbox is not checked.

Default Deadfrt Xterm

CFGDefaultDeadfrtXterm

When enabled, if a cargo does not have an dead freight extra freight term, it will be created automatically and set to 100%.